Fuchs Arabco For Petroleum Industires FUCHS EGYPT
Products * Industrial * Hydraulic Oil

1- RENOLIN B

Description
The RENOLIN B RANGE is based on selected mineral base oils. High quality additives improve the ageing and oxidation stability. They also guarantee excellent corrosion protection properties (steel and iron materials). Synergistically acting copper deactivators protect copper / yellow metal materials. The selected anti-wear / mild EP additives based on zincdialkyldithiophosphates protect hydraulic pumps, motors, components and machine elements from wear (at low and high temperatures and at high loads).

The RENOLIN B RANGE are mineral oil based hydraulic fluids according to DIN 51 524-2 (demulsifying, zinc containing) and lubricating oils according to DIN 51 517.

Synergistically acting additives guarantee a long lifetime and the highest hydraulic performance. Even at high temperatures and high loads the base oils together with the additives ensure that the system will be operated reliably during a long lifetime. The RENOLIN B RANGE fulfils the high requirements of the DENISON HF 0 specification (hybrid pump test, a combination of a vane and a piston pump - T6H20C combination).

Application
Universally applicable demulsifying hydraulic fluids and lubricating oils. They can be used in all types of mobile and stationary hydraulic units where the use of a demulsifying hydraulic oil (type HLP) is recommended.

Specifications

  • DIN 51 524-2: HLP
  • ISO 6743-4: HM
  • Denison HF 1, HF 2, HF 0
  • Vickers I 286-S, M 2950-S
  • Cincinnati Machine P68, P69, P70
  • US Steel 127, 136
  • AFNOR NFE 48690 (dry) and NFE 48691 (wet)

For more details

 

2- RENOLIN B HVI

Description
RENOLIN B HVI oils are premium quality hydraulic oils that have a very high viscosity index and low pour point. As a result of high viscosity indexes and the extremely low pour points, these oils may be considered as multi-grade products. They are formulated from high quality paraffinic base oils and contain corrosion and oxidation inhibitors as well as anti-foam and anti-wear additives.

Application
RENOLIN B HVI oils have been developed to meet the severe requirements of hydraulic systems found in modern construction equipment. High working pressures, low temperature oil thickening and elevated temperatures can promote premature wear on hydraulic systems’ components.

RENOILN B HVI oils have been formulated to alleviate these conditions to ensure long and trouble free life for pumps, motors, valves and actuating cylinders. The 46 & 68 ISO grades will easily surpass the requirements of the Vickers Vane Pump wear test.

For more details

3- RENOLIN RD

Description
RENOLIN RD meet most manufacturers’ specifications and are suitable for airline lubrication of all types of pneumatically operated equipment. The oils are adhesive in nature and provide excellent film strength and lubricity characteristics. They exhibit good metal wetting characteristics and offer satisfactory protection against rust and corrosion. RENOLIN RD minimise deposit formation, are non-hazardous, non-toxic and have no disagreeable odour.

Application
RENOLIN RD will perform satisfactorily under the most severe operating conditions provided the oilers and the pneumatic equipment are properly maintained. Periodic inspection should be made to ascertain that excessive water and foreign material is not entering the equipment, and sufficient oil is reaching the lubricated surfaces. Upon disassembly, ports and passages of pneumatic equipment should be washed with a solvent, kerosene, or diesel fuel and then coated with the proper grade of RENOLIN RD before reassembling. Care should be taken to follow the manufacturer's operating and troubleshooting recommendations for continued proper operation of pneumatic equipment. Selection of the proper grade of oil depends on the equipment being lubricated, and factors such as the ambient operating temperature. In general, the larger the tool and harder it works, the higher the viscosity of the oil required. RENOLIN RD oils are recommended for airline lubrication of all types of pneumatically operated equipment. The superior qualities of RENOLIN RD will enhance the operation of rock drills of the percussion type and associated equipment such as jackhammers, paving breakers, quarry drills, spike drivers, clinker breakers and concrete vibrators. In addition, RENOLIN RD are the recommended oils for pneumatic tools such as impact wrenches, rivet hammers, drills and reamers, wood borers, safety saws, diggers and tempers, concrete surfacers, sanders and cleaners, scaling, caulking and chipping tools and air hoists.

For more details

4- TITAN ZH 4300 B

Description
TITAN ZH 4300 B is a fully synthetic Central Hydraulic Fluid which shows improved performance regarding viscosity temperature characteristics and simultaneously optimized shear stability. Additionally TITAN ZH 4300 B offers improved properties regarding the thermal stability due to the use of high quality base-oils.

Approvals
Man M 3289

For more details

5- HYDRAULIC 37

Description
HYDRAULIC OIL 37 is a high quality anti-wear hydraulic oil for moderate to heavy loads and general lubrication applications. It is made from virgin mineral oils and hightech additives. It provides excellent protection against wear and corrosion, and exhibits good oxidation stability and water separation properties.HYDRAULIC OIL 37 meets HLP hydraulic oil specifications and is available in ISO 32 grade.

Application
HYDRAULIC OIL 37 is best suited where a DIN HLPor ISO HM oil of ISO VG 32 grade is recommended.It is suitable for mobile and stationary hydraulicequipment. It is the best choice for hydraulic systemsof construction machinery, forklifts, shovels, and cranes etc.

Specifications

  • DIN 51524-2: HLP
  • ISO 6743-4: HM
  • ISO VG 32

For more details