Fuchs Arabco For Petroleum Industires FUCHS EGYPT
Products * Industrial * Gear Oil

1- RENOLIN CLP

Description
RENOLIN CLP oils are premium quality extreme pressure gear lubricants, manufactured from the highest quality base oils combined with extreme pressure additives of the sulphur-phosphorous type. This combination provides very high load-carrying properties and affords maximum protection for gear teeth in severe service conditions.

Application
RENOLIN CLP Series are recommended for all industrial applications where the machinery manufacturer recommends the use of CLP type oil.

Highly-stressed bearings, joints, pressure spindles, spur and worm drive gears are reliably, effectively and economically lubricated even at elevated temperatures. The use of these oils guarantees the quiet and smooth running of machinery along with optimum operational reliability.

Specifications

  • DIN 51517-3 (2004):CLP
  • ISO 6743-6 and ISO 12925-1: CKC/CKD
  • US Steel 224
  • AGMA 9005-D95/E02:EP
  • David Brown S1 53.101

For more details

 

2- RENOLIN PG

Description
The RENOLIN PG oils are fully synthetic industrial gear oils based on special, newly developed polyglycol base oils.

RENOLIN PG gear oils display very low friction coefficients in tribological conditions. Their high natural viscosity index makes them shear-stable.

RENOLIN PG oils can be used at both high and low temperatures.

RENOLIN PG oils offer advantages compared with mineral oil-based gear oils especially in applications with high sliding velocities (e.g. worm gear units). Due to the high oxidation stability, the oil change intervals can be extended and the maintenance costs can be reduced at higher operating temperatures. excellent protection against rusting, corrosion and foaming.

Application
The RENOLIN PG gear oils are mainly suitable for the lubrication of gear units and worm gears / roller bearings and friction bearings which are subject to high mechanical and thermal stress.

The use of RENOLIN PG in worm gears (steel-bronze pairing) leads to a significant reduction of friction and wear. The RENOLIN PG products can also be used for paper machines, calendars, conveying machines and milling bearings. Peak temperatures of up to 200ºC are temporarily tolerable.

Specifications

  • DIN 51 517-3 (2004): CLP-PG
  • ISO 6743-6 and ISO 12925-1: CKC / CKD / CKE / (CKS) / CKT
  • AGMA 9005/E02: EP
  • A. Flender
  • Alpha Getriebebau
  • SEW

For more details

3- RENOLIN UNISYN CLP

Description
RENOLIN UNISYN CLP are fully-synthetic industrial gear lubricants with elevated aging resistance, excellent load carrying capability and wear protection.

RENOLIN UNISYN CLP oils provide excellent wear protection and high EP performance, offering good resistance to micropitting. Reliable lubrication of roller bearings is confirmed by the good results of the FE8 testing.  Compared to mineral oils, the service life of these oils is about 2-3 times longer.

Their compatibility with paints and elastomers is comparable with that of mineral oils. 

Application
The oils of the RENOLIN UNISYN CLP series are used for all applications in industry where a synthetic oil of the CLP type according to DIN 51 517-3 is recommended by the manufacturer.

Highly-stressed bearings, joints, pressure screws, spur gears and worm gears can be reliably, safely and economically supplied even at short-term peak temperatures up to 150ºC.



Specifications

  • DIN 51 517-3: CLP
  • ISO 6743-6 and ISO 12925-1: CKC / CKD / CKE
  • AGMA 9005/E02: EP
  • AIST 224
  • David Brown S1 53.101
  • FAG requirements: FAG-FE8 Test: stage 1-4 pass (test report is available for ISO VG 320)
  • SKF requirements: pass (100ºC-test)
  • A. Friedrich Flender AG
  • Bocholt
  • FORD WSS-M2C928-A

For more details